Assembly; Remove The Motor Unit From The Container; Castors - BASETech 1661489 Notice D'emploi

8. Assembly

a) Remove the motor unit from the container
• Pull up the locking lever on both sides of the container. Fold the locking lever to the outside.
• Remove the motor unit from the container.
• When reinserting, the latch points of the motor unit must be aligned to the lock levers.
Locking lever
Latch point
b) Castors
• Place the container upside down.
• Insert the castors in the slots.
• Secure each of the castors with a black screw.
26