Introduction; Specifications - Powermatic 701 Instructions D'utilisation

Introduction

This manual is provided by Powermatic covering the safe operation and maintenance procedures for a
Model 701 Deluxe Bench-top Mortiser. This manual contains instructions on installation, safety
precautions, general operating procedures, maintenance instructions and parts breakdown. This machine
has been designed and constructed to provide consistent, long-term operation if used in accordance with
instructions set forth in this manual. If there are any questions or comments, please contact either your
local supplier or Powermatic. Powermatic can also be reached at our web site: www.powermatic.com.

Specifications

Model No. .................................................................................................................................................. 701
Stock No. ........................................................................................................................................... 1791310
Chisel shank capacity, maximum .............................................................................................................. 3/4"
Chuck capacity, maximum ........................................................................................................................ 1/2"
Chisel stroke, maximum ......................................................................................................................... 5-1/2"
Chisel center to fence distance .............................................................................................................. 4-3/8"
Bushing sizes provided .....................................................................................................................5/8", 3/4"
Fence size .............................................................................................................................. 12-1/2" x 2-5/8"
Base size ............................................................................................................................ 16-5/16" x 13-3/4"
Capacity under hold-down ........................................................................................................................... 5"
Spindle speed ................................................................................................................................ 1725 RPM
Motor (TEFC) .......................................................................... 3/4 HP, 1 PH, 4P, 115V/230, Pre-wired 115V
Weight (net/shipping) ....................................................................................................................... 84 / 92 lb
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, Powermatic reserves the right to change specifications at any time and without
prior notice, without incurring obligations.
6