Implementation Of The Products; Positioning Of N.clean And N.cid Bottles Implementation Of The Products - NSK iCare+ Mode D'emploi

3.2. Implementation of the products

3.2.1. Positioning of n.Clean and n.Cid bottles Implementation of the products

Start opening the Top cover and take the bottles of n.Clean and n.Cid solutions supplied (see Figure 9).
Figure 9: n.Clean & n.Cid ready to be positioned on iCare+ device
iCare+ User Manual V11.4 • 09/2017
CAUTION:

Keep the products in a cool dry place and well ventilated. Not exposed to
sunshine.

Avoid any contact with skin and eyes.

It is recommended to use protective glasses and gloves during handling of
bottles or during emptying of waste drawer.

In case of contact with the eyes, rinse the eyes with water with the eyelids
open for a sufficient length of time, and then seek ophthalmological advice
immediately.

In case of contact with skin, wash off immediately with soap and water. In
case of skin reactions, seek medical advice.

In case of inhalation, move affected person into fresh air. In case of irritation
of the airways, seek medical advice.

If swallowed, rinse out mouth and then drink plenty of water. Do not induce
vomiting. Seek medical advice.
CAUTION: Do not forget to remove the metallic cap on each bottle, before starting
the implementation of the consumables; you may damage the iCare+ device.
p. 15