Cleaning And Maintenance - Termozeta CAPPUCCIONE IL CREMA LATTE Mode D'emploi

• To start preparing the milk froth, press the ON/OFF push button (11)
THREE TIMES (fig.7).
• After few seconds, the green pilot light (9) begins flashing showing
that the cold milk froth is being prepared (fig.8). Tha appliance stops
automatically.
• The appliance preparing the milk froth can be stopped at any moment
by pressing the ON/OFF push button (11).
PREPARING THE HOT MILK
• Fit blender (3) (fig.2).
• Pour the milk quantity desired up to the indication inside
pot (8) (fig.3).
• Put lid (1) back on pot (8) (fig.4).
• Plug the appliance into the socket (fig.5): the red pilot light (10) turns
on showing that the appliance is connected to the power supply
(fig.6).
• To start preparing the hot milk, press the ON/OFF push button (11)
TWICE (fig.7).
• After few seconds, the green pilot light (9) turns on showing that the
milk is being heated (fig.8). Tha appliance stops automatically.
• The appliance preparing the hot milk can be stopped at any moment by
pressing the ON/OFF push button (11).
WARNING!
The appliance can carry out three consecutive preparations at
maximum. After that, it is programmed for a stand-by period of five
minutes in order to allow the electric and electronic components to
completely cool off, thus avoiding any superheating problem.

CLEANING AND MAINTENANCE

WARNING!
Before carrying out any cleaning operations, disconnect the plug
from the power outlet and wait until the appliance has cooled off.
SUGGESTIONS: The appliance cleaning will be easier if it is carried
out immediately after use.
ENGLISH
MAX