Dyna-Glo DGF493BNP Mode D'emploi page 11

ASSEMBLY INSTRUCTIONS
9. Assemble the grill body assembly (D) onto the
cart assembly with four M6x16 bolts (DD).
Hardware Used
DD M6x16 Bolt
10. Pre-assemble two M6x16 bolts (DD) onto the
grill body assembly (D) and do not tighten them.
Make sure to leave a 5mm gap between the
bolt and grill body's end cap. Then hang the
left side table assembly (K) on the bolts and
fasten the left side table assembly (K) with
three M6x16 bolts (DD) and tighten all bolts.
Hardware Used
DD M6x16 Bolt
9
x 4
10
DD
5mm
x 5
11
D
K
DD
D