Safety Instructions - SYNQ X-TRM1 Mode D'emploi

Congratulations and thank you for buying this SYNQ product. Please read through these
operating instructions so you will know how to operate this product properly. After you
have finished reading the instructions, put them in a safe place for future reference.
•
Very High Torque platter motor
•
Extremely fast start, adaptable from 0.2 to 6 seconds.
•
Extremely fast stop, adaptable from 0.2 to 6 seconds.
•
3 speeds: 33, 45, 78 rpm with quartz lock
•
3 Pitch adjustment ranges: +/-10% ; +/-20% ; +/-50%
•
Forward / reverse play
•
2 Start / stop buttons for maximum flexibility
•
Unbreakable white LED target light
•
Phono / Line output selector on backside
•
Original Stanton cartridge included
•
All metal S-shaped tone arm assembly with:
• Counterweight
• Height adjustment with locking
• Anti-skating adjustment
• Lever lift with height adjustment
•
Adjustable large feet for perfect leveling
Check that the following parts are included in the package with the main unit:
•
Turntable platter
•
Slip mat
•
45-rpm adapter
•
Counterweight
•
Head shell
•
Operating instructions
•
Cartridge
•
Connecting cord cinch/cinch
1/29

SAFETY INSTRUCTIONS:

CAUTION
The lightning flash with arrowhead symbol within the equilateral triangle is
intended to alert the use or the presence of un-insulated "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock.
The exclamation point within the equilateral triangle is intended to alert the
user to the presence of important operation and maintenance (servicing)
instructions in the literature accompanying this appliance.
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
Do not place metal objects or spill liquid inside the turntable. Electric shock or malfunction
may result.
INSTALLATION GUIDELINES:
•
Install the turntable in a well-ventilated location where it will not be exposed to high
temperatures or humidity.
•
Placing and using the turntable for long periods near heat-generating sources such as
amplifiers, spotlights, etc. will affect its performance.
•
When the turntable is used in a loud-sound environment, for example near speakers,
sound skip and feedback may occur.
•
Install the unit on a perfectly horizontal and very stable surface. A concrete or marble
surface is perfect. A wooden surface is a bad choice while it amplifies vibrations.
•
Be sure the turntable, including its audio and mains cords, does not touch any
vibrating materials. Take special care when using the unit while it is installed in a
carrying case.
•
Because of its two start/stop buttons the X-TRM1 turntable can be used in both
traditional and battle style setups:
Traditional setup:
Mostly used in discotheques.
Best for all round mixing.
CLEANING THE TURNTABLE:
Clean by wiping with a cloth slightly dipped with water. Avoid getting water inside the unit.
Do not use volatile liquids such as benzene or thinner which will damage the unit.
2/29
CAUTION: To reduce the risk of electric shock,
do not remove any cover. No user-serviceable
parts inside. Refer servicing to qualified service
personnel only.
Battle style setup:
Mostly used for scratching and
other aggressive mixing techniques