Language; Factory Reset; Sw Version; Sleep Timer - Albrecht DR 330 Mode D'emploi

2. Press SELECT to confirm 'Power On'.
3. Turn SELECT to cycle through options:
confirm the desired level, for the 'Power On' condition we recommend the setting 'High'.
For 'Standby' condition
1. Changing the backlighting for the 'Standby' condition works like for the 'Power On' condition. But
instead of selecting 'Power On' on the second step turn SELECT until 'Standby' is displayed then
continue as described in the last chapter

7.4 Language

The default language is German. To change this, please follow the 2 steps below:
1. Press MENU turn SELECT to 'Sprache', press SELECT to confirm.
2. Turn SELECT to your desired language, and then press SELECT to confirm.

7.5 Factory Reset

Sometimes, you might want to delete all the settings your radio currently has and get back to the set
up with which the radio was delivered.
1. Press MENU turn SELECT to 'Factory Reset', press SELECT to confirm.
2. Turn SELECT to 'Yes', press SELECT to confirm.

7.6 SW Version

In case that your radio is causing trouble it might be necessary sometimes to know the software
version of the radio.
1. Press MENU turn SELECT to 'SW version', press SELECT to confirm.

7.7 Sleep timer

With the sleep timer you can select a timespan after which the radio turns itself off. To setup the sleep timer follow
these steps:
1. Press SLEEP to enter the 'Sleep timer menu'. Now the display shows 'Sleep off'
2. Turn SELECT or press Sleep repeatedly to set the sleep timer: off/15/30/45/60/90 minutes,
press SELECT to confirm the desired time.
3. Want to check how much time remains? Press SLEEP again.
4. The Radio will automatically put itself into standby mode after the timer reaches zero.
High', 'Medium' and 'Low', then press SELECT to
'
14