Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Power cord plugs must match the outlet. Never mod-
ify the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodified
plugs and matching outlets will reduce risk of electric
shock.
Avoid body contact with earthed or grounded surfac-
es such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your
body is earthed or grounded.
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Replace
damaged cord immediately. Damaged or entangled
cords increase the risk of electric shock.
Do not expose this compressor to rain. Do not use in
damp or wet locations. Moisture increases the risk of
electric shock with this equipment.
Do not touch plug with wet hands. Moisture increases
the risk of electric shock with this equipment.
Keep all electrical connections dry and off the ground.
Do not allow electrical connections to lay in water or in
such a position where water could come into contact
with cord and connection. Moisture increases the risk
of electric shock with this equipment.
sAfety rules for eleCtrIC ComPressors
sAVe tHese InstruCtIons
When operating a power tool outdoors, use an exten-
sion cord suitable for outdoor use and with correct
amperage capacity. Use of a cord rated for outdoor
use reduces the risk of electric shock.
Always disconnect compressor from power supply,
vent air tanks, and allow compressor to cool before
servicing. Compressors with automatic pressure con-
trols can restart at any time.
Always turn off the motor when not in use and before
moving compressor. Stopping the motor prevents
unintentional starting of the compressor.
Some dust created by power sanding, sawing, grind-
ing, drilling, and other construction activities contains
chemicals known to cause cancer, birth defects or oth-
er reproductive harm. Some examples of these chemi-
cals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and other
masonry products, and
• Arsenic and chromium from chemically treated
lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilat-
ed area, and work with approved safety equipment,
such as those dust masks that are specially designed
to filter out microscopic particles.
5
Publicité
Table des Matières
