Waring Commercial WCO250 Mode D'emploi page 20

Four à convection commercial
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

. Rotate the screwdriver counterclockwise to
remove the screw.
3. Remove the oven light cover.
B. Install or Replace the Oven Light
Use a 10V/15W clear appliance light bulb with
intermediate base by Westinghouse, or phone
Waring Customer Service at 1-800-49-7464 to
order a light bulb.
C. Replace the Oven Light Cover
1. Insert the tab of the oven light cover into the slot
in the side of the oven light compartment.
. Insert the screw into the hole in the oven
light cover.
3. Holding the screw, push the oven light cover
towards the side of the oven until the screw
enters the screw hole.
4. Turn the screw clockwise until the threads
start to engage.
5. Insert the screwdriver in the slot of the screw.
6. Tighten the screw by turning the screwdriver
clockwise.
0

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Wco250c

Table des Matières