Dmx Linking - Chauvet DJ Derby X Manuel De Référence

EN

DMX Linking

The Derby X can work with a DMX controller. Instructions for connecting and configuring this product for DMX operation
are in the User Manual. If you are not familiar with DMX, download the DMX Primer from www.chauvetdj.com.
Starting Address
To ensure full access to all channels available in each DMX mode, the highest recommended DMX address is 505.
Master/Slave Connection
The Derby X uses the DMX data connection for its Master/Slave mode. Information about configuring the Derby X for
Master/Slave operation is in the User Manual, which is available from the Chauvet website.
DMX Values
Channel Function
1 LED Cluster 1
2 LED Cluster 2
3 LED Cluster 3
4 LED Cluster 4
5 LED Cluster 5
6 LED Cluster 6
7 Strobe
Automatic Programs/
8
Sound-Active Mode
3
QUICK REFERENCE GUIDE
Value Percent/Setting
000  010 No function
011  045 Red
046  080 Green
081  115 Blue
116  150 Red and green
151  185 Red and blue
186  220 Green and blue
221  255 Red, green, and blue
000  255 See Channel 1
000  255 See Channel 1
000  255 See Channel 1
000  255 See Channel 1
000  255 See Channel 1
000  010 No function
011  255 Strobe, slow to fast
000  010 No function
011  024 Automatic program 1
025  038 Automatic program 2
039  052 Automatic program 3
053  066 Automatic program 4
067  080 Automatic program 5
081  094 Automatic program 6
095  108 Automatic program 7
109  122 Automatic program 8
123  136 Automatic program 9
137  150 Automatic program 10
151  164 Automatic program 11
165  178 Automatic program 12
179  192 Automatic program 13
193  206 Automatic program 14
207  220 Automatic program 15
221  250 Automatic program 16
251  255 Sound-active mode
Derby X QRG Rev. 1