Lovibond TB 300 IR Mode D'emploi page 32

Important steps before using the TB300 IR
Please carry out the following steps as described in the Instruc-
tion manual. Become familiar with your new TB300 IR before
starting with the first tests:
• Unpacking and inspection of delivery contents, see page 50 .
• Install the rechargeable batteries/batteries and the Lithi-
um-battery, see page 38.
• Using rechargeable batteries:
Charge the rechargeable batteries in the instrument for
5 days (it is possible to continue using the instrument). Now
use the instrument without mains power until the first bat-
tery warning comes up. Charge again, for 4 days this time.
Repeat this cycle four times.
Perform the following settings in the Mode-Menu;
• MODE 10:
• MODE 12:
• MODE 34:
If required set other functions.
IMPORTANT NOTE:
The Lithium battery (for saving data and clock) works for
approx. ½ year in case of no power from mains adapter or
rechargeable batteries/batteries.
The delivered instrument is factory calibrated and can be
used immediately.
For later user-calibration please refer to the instruction manual.
TB300 IR_3 04/2014
32
select language
set date and time
perform "Delete data"
TB300 IR 6 03/2022