System Components; Receiver Programming - FAME MSW-2 Manuel D'utilisation

Headset Set:
1x MSW-2R Receiver
2x MSW-BP Bodypack
2x MSW-HS Headset
1x Power Adapter
1x 6.3mm Jack Cable
4x AA-Batteries
1x Manual
MSW-2R Reciever Front
1: Knob for Signal-Output Level
2: LED Channel Indicator
3: Audio Signal Indicator
4: RF Signal Indicator
MSW-2R Reciever Back
1: Power Connection

Receiver Programming

Operating the Select button allows you to change the relative channel of the receiver.
The selected channel is displayed by the LED indicator.
Channel synchronisation is completed via the ASC button. Hold the infrared unit of the transmitter
(microphone/bodypack) in front of the receiver (max 0.5m). Channels are synchronized when the red
LED flashes.
The knobs on the front of the device allow the volume level of each channel to be adjusted.
Audio Output Level
Output Impedance
Dimensions incl. Mic.
Power Supply
Range

System Components

Instrumenten Set:
1x MSW-2R Receiver
2x MSW-BP Bodypack
2x Instrument Cable
1x Power Adapter
1x 6.3mm Jack Cable
4x AA-Batteries
1x Manual
0dBV
1KOhm
210 x 116 x 42mm
12-18VDC at 400mA, external adapter
Up to 50m
Vocal Set:
1x MSW-2R Receiver
2x MSW-MD Wireless Microphone
1x Power Adapter
1x 6.3mm Jack Cable
4x AA-Batteries
1x Manual
5: Infrared Unit
6: Channel Selection
7: Channel Synchronisation
2: 6.3mm Jack Output (Balanced)
11