for Living 052-9332-2 Guide De L'utilisateur page 11

7. Installing Bulb
Install one A19 11W (max) LED bulb (not included)
in to the sockets on th e light kit (18) (fig.14).
8. Attaching Glass Shade
Loosen the three light kit screws (19) on the light
kit (18). Install the glass shade (20) onto the light kit
(18). Finger tighten the three light kit screws (19)
(fig. 15).
9. Extending Pull Chains
Attach the decorative chains from the hardware
bag to the fan and light pull chains. Insert the end
of the chain into the chain coupling. Check that
the chains are secure by lightly pulling both chains
in the coupling (fig. 16).
Turn Fan ON/OFF and Select Fan Speed
Restore power to ceiling fan and test for proper operation.
The fan pull chain controls the fan speed settings.
First pull turns the fan on at high speed.
Second pull turns the fan on at medium speed.
Third pull turns the fan on at low speed.
Fourth pull turns the fan off.
The light pull chain controls the light.
First pull turns the light on.
Second pull turns the light off.
11