Legal Notices; Product Name; Emc Requirements Of Ec Directive; Laser Safety - Canon imageRUNNER ADVANCE C5051 Guide D'utilisateur

Legal Notices

Product Name

Safety regulations require the product's name to be registered. In some regions where this product is sold, the following
name(s) in parenthesis may be registered instead.
- imageRUNNER ADVANCE C5051/C5051i, imageRUNNER ADVANCE C5045/C5045i (F154100)
- imageRUNNER ADVANCE C5035/C5035i, imageRUNNER ADVANCE C5030/C5030i (F154300)

EMC requirements of EC Directive

This equipment conforms with the essential EMC requirements of EC Directive. We declare that this product conforms with
the EMC requirements of EC Directive at nominal mains input 230 V, 50 Hz although the rated input of the product is 220 to
240 V, 50/60 Hz. Use of shielded cable is necessary to comply with the technical EMC requirements of EC Directive.

Laser Safety

This Product is certified as a Class I laser product under IEC60825-1:2007 and EN60825-1:2007. This means that the product
does not produce hazardous laser radiation.
Since radiation emitted inside the product is completely confined within protective housings and external covers, the laser
beam cannot escape from the machine during any phase of user operation.
Do not remove protective housings or external covers, except as directed by the equipment's manual.

Additional Information

When servicing or adjusting the optical system of the product, be careful not to place screwdrivers or other shiny objects in
the path of the laser beam. Also, accessories such as watches and rings should be removed before working on the product.
The reflected beam, even though visible or invisible, can permanently damage your eyes.
The label shown below is attached to the paper drawer's right cover and toner supply port cover.
This Product has been classified under IEC60825-1:2007 and EN60825-1:2007, which conform to the following classes;
CLASS 1 LASER PRODUCT
LASER KLASSE 1
APPAREIL Á LASER DE CLASSE 1
APPARECCHIO LASER DI CLASSE 1
PRODUCTO LÁSER DE CLASE 1
APARELHO A LASER DE CLASSE 1
LUOKAN 1 LASER-TUOTE
LASERPRODUKT KLASS 1
Use of controls, adjustments, or performance of procedures other than those specified in the manuals for this machine may
result in hazardous radiation exposure .
xiii