Initial Commissioning; Controls; Switches And Keys; Display - Intimus 16.86 SmartShred Instructions D'opération

GB
DANGER!
Risk of death by electrocution!
Correcting the phase relation at the control box
may only be carried out by a qualified electrici-
an!

3 .4 Initial commissioning

Switch on, set the language and time. See „Display", p. 19.
4

Controls

4 .1 Switches and Keys

1 Key selector switch
2
Main switch (emergency stop)
3
Start button, green
4
Reset button, yellow
5
Stop button, red
6

Display

fig. 7 Controls
1
= Key selector switch
a) Left: manual operation
The „Manual operation" screen appears. Manual con-
trol of the machine via the display.
b) Middle: lock
94710 1 02/18
c) Right: automatic mode
2
= Main switch (emergency stop)
This switch is used to switch the machine on and off
(position "1" or "0").
3
= Start button, green
Only in automatic mode:
When this button is pressed, the shredder's cutting me-
chanism and conveyor belt start running and the ma-
chine can be loaded.
4
= Reset button, yellow
Only in automatic mode:
Press the button as instructed on the display.
5
= Stop button, red
Only in automatic mode:
When this button is pressed, the shredder is switched
off and the cutting mechanism and conveyor belt are
stopped.
6
= Display
All other information is entered and output via the dis-
play (settings, control, status messages, error messages).
6
5
4
4 .2 Display
3
Four main screens (fig. 7/6) are used to control the machine.
2
1
000119
The machine can be locked and thus secured against
unauthorised use. When the main switch is on, the
start screen appears.
The "Automatic mode" screen appears.
NOTE!
To avoid display damages from scratches and
cracks put tools and the like out of your hand be-
fore operating.
NOTE!
The display contains various buttons, fields and il-
luminated displays:
Circular: illuminated information display
Rectangular: text output field
Rectangular with 3D effect: input button
16.86 SmartShred
19