Warranty Conditions - GYS AUTOPULSE M1 Manuel D'utilisation

Operating manual
Automatic deletion of JOBS.
Push Pull torch detection error.
USB key error.
File error.

WARRANTY CONDITIONS

The warranty covers any defects or manufacturing faults for two years from the date of purchase (parts and labour).
The warranty does not cover:
• Any other damage caused by transportation.
• General wear of parts (eg. : cables, clamps, etc.).
• Damage caused by misuse (incorrect power supply, the dropping or dismantling of equipment).
• Environmental failures (pollution, rust and dust).
In the event of a breakdown, return the appliance to your distributor, together with:
- dated proof of purchase (receipt, invoice, etc.),
- a note explaining the breakdown..
32
Translation of the original
instructions
Some of your JOBs have been deleted
because they were incompatible with the new
pre-installed user settings (synergies).
-
There is no JOB detected on the USB stick.
The product's memory space is full.
The file does not match the pre-installed
user settings (synergies) downloaded to the
product.
AUTOPULSE M1 - M2 - M3
-
Check Push Pull torch connection.
-
Free up some space on the USB key.
The file was created with pre-installed user
settings (synergies) that are not present on the
machine.