Engine Specifications; Configuration - Williams Dieseljet 445 Manuel D'utilisation

Masquer les pouces Voir aussi pour Dieseljet 445:

Manuel du propriétaire (58 pages)

Manuel du propriétaire (134 pages)

Table Des Matières

Table des Matières

Les langues disponibles

Thank You for Choosing a

Williams Dieseljet

This owner's handbook has been compiled to help you operate your Dieseljet with safety and

pleasure. It contains details of the boat and equipment fitted, together with information on its

operation and maintenance. Please read it carefully, along with the Yanmar Engine manual,

and familiarise yourself with the boat before using it.

The Williams Dieseljet uses water jet propulsion. If this is your first boat or you are changing

to a type of boat you are not familiar with, for your own safety, please ensure that you obtain

handling and operating experience before assuming command of the boat. Your dealer,

national sailing federation or yacht club will be pleased to advise you of sea schools, or

competent instructors.

To take advantage of the Yanmar Engine Warranty, please remember to register your engine

online at www.yanmarmarine.com.

The Dieseljet range are high performance boats. Williams recommends a minimum

standard of RYA level 2 or ICC (International certificate of competency) is attained by

the operator prior to taking control of this boat. This manual assumes the operator has

acquired this standard of qualification and possesses knowledge of basic seamanship.

Please keep this handbook in a secure place and hand it to the new

owner if you sell the boat.

Hull Identification Number (HIN):

Safety

Williams Jet Tenders consider the safety of our customers of great importance. We

recommend people using our products exercise care and common sense, and comply with

the safety information within the Owner's Handbook.

Always obey the safety labels fitted to the tender and replace should they become unreadable.

Be aware of local laws and restrictions and never use whilst under the influence of alcohol or

any substance which may affect your judgement.

This symbol appears on a number of labels fitted to the Tender.

The symbol draws your attention to the message and refers you to the Owner's

Handbook.

This safety alert symbol appears throughout the Owner's Handbook and appears on

various labels fitted to the tender. It means attention, be alert, your safety is involved!

Please read and abide by the message that follows the safety alert symbol.

DANGER

Indicates a hazardous situation which, if not avoided, will result in death or serious injury.

WARNING

Indicates a hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION

Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

www.williamsjettenders.com

Classification

Category C – "inshore": Craft designed for voyages in coastal waters, large bays, estuaries,

lakes and rivers, where conditions up to and including wind force 6 and significant wave

heights up to and including 2m may be experienced. These boats comply with ISO 6185-3.

The Hull Identification Number is located above jet nozzle on starboard side below platform

step: record it in the box opposite. The CE plate is located in the starboard footwell. The CE

plate is the certification to European Directive 94/25/CE.