Technical Data; Limited Warranty - GreenWorks PS24B00 Manuel D'opérateur

Problem Possible cause
The bar and chain Oil tank is empty. Fill the oil tank.
gets hot and
smokes.
The discharge
port is blocked.
Inlet opening of
inner oil tank is
blocked.
The sprocket is
stuck and clogged
with debris.
The bar and chain The chain tension
gets too hot and is too tight or too
can not cut. loose.
The chain is dull
The chain is put
on backwards.
The motor runs,
When you use the
but the chain does
machine under
not cut correctly,
load, it stops.
or the motor stops
after around 3
seconds.
The chain is not
lubricated.
12

TECHNICAL DATA

Voltage
Guide bar length
Chain pitch
Chain gauge
Chain oil capacity
Weight (without battery
pack)
Chain
Guide bar
The recommended ambient temperature range:
English
Solution
1. Remove the
battery pack.
2. Remove dirt
from the dis-
charge port.
1. Clean the oil
tank.
2. Fill with clean
bar and chain
lubricant.
1. Clean the
sprocket.
2. Fill with clean
bar and chain
lubricant.
Refer to Adjust
the Chain Tension
in the manual.
Sharpen or re-
place the chain.
Take out the chain
and turn it in the
right direction.
1. Release the
trigger.
2. Start the ma-
chine again.
Lubricate the
chain to decrease
the friction.
24V DC
8'' (200 mm)
3/8" LP (9.5 mm)
.050" (1.3 mm)
80 ml
8.2 lbs (3.7 kg)
91PJ033X/CL15033X
080NDEA318/
M1500833-1318TL
Item
Appliance storage tempera-
ture range
Appliance operation temper-
ature range
Battery charging temperature
range
Charger operation tempera-
ture range
Battery storage temperature
range
Battery discharging tempera-
ture range
13

LIMITED WARRANTY

LIMITED WARRANTY
GARANTIE LIMITÉE
Greenworks hereby warranties this product, to the original
purchaser with proof of purchase, for a period of three (3)
years against defects in materials, parts or workmanship.
Greenworks, at its own discretion will repair or replace any
and all parts found to be defective, through normal use, free
of charge to the customer. This warranty is valid only for
units which have been used for personal use that have not
been hired or rented for industrial/commercial use, and that
have been maintained in accordance with the instructions in
the owners' manual supplied with the product from new.
ITEMS NOT COVERED BY WARRANTY:
1. Any part that has become inoperative due to misuse,
commercial use, abuse, neglect, accident, improper
maintenance, or alteration; or
2. The unit, if it has not been operated and/or maintained in
accordance with the owner's manual; or
3. Normal wear, except as noted below;
4. Routine maintenance items such as lubricants, blade
sharpening;
5. Normal deterioration of the exterior finish due to use or
exposure.
HELPLINE:
Warranty service is available by calling our toll-free helpline,
at 1-888-909-6757.
11
Temperature
-4°F (-20°C) - 158°F (70°C)
6.8°F (-14°C) - 104°F (40°C)
39°F (4°C) - 113°F (40°C)
39°F (4°C) - 113°F (45°C)
32°F (0°C) - 73°F (23°C)
6.8°F (-14°C) - 113°F (45°C)
3
YEAR
ANS
AÑOS
GARANTÍA
LIMITADA
EN