Safety Precautions - Voltmaster MCM 1 Mode D'emploi

Safety precautions

The MCM 1 left the factory with its safety features in a perfect operating condition. The user must
comply with the specifications of the safety information contained in this manual In order to main-
tain this condition.
Caution!
Only use the safety test leads included in the scope of delivery or
equivalent leads which comply with the same measurement category.
In order to avoid an electric shock, comply with the precautions when working with voltages
|
greater than 120 V (60 V) DC or 50 V (25 V) eff. AC. These values represent the limits of safe-
to-touch voltages in accordance with DIN VDE. (Values given in brackets apply e.g. to the
medical or agricultural sectors)
| Ensure that the test leads and the test instrument are in perfect working order before taking
each measurement.
The test leads and probes must only be handled using the grips provided. Avoid touching the
|
probes under any circumstances.
The test instrument may only be used for the measurement ranges specified.
Attention!
Check for the correct function of the instrument (e.g. using a known
voltage source, see: DIN VDE 0105, part 1) before its use.
22