Func - Panasonic AJ-RC10G Mode D'emploi

Menu item
(Continued)
SKIN DTL (Continued)
Variable
Layer Item
range
5 ICENT 0 To set the center
: position on the I-axis (to
255 set the area where
SKIN TONE is effective)
IWIDTH 0 To set the width of the
: area where SKIN TONE
255 on the I-axis with the
center position at I
CENT is effective
6 QWIDTH 0 To set the width of the
: area where SKIN TONE
90 on the Q-axis with the
center position at I
CENT is effective
QPHASE –180 To set the phase of the
: area where SKIN TONE
+179 having a standard on
the Q-axis is effective
7 SKIN-GET EXEC This will be used for
obtaining the color
phase as the target for
SKIN TONE DTL
Contents description Storage
Yes
Yes
No

FUNC

Variable
Layer Item
range
1 IRISLVL 0 To set the target value
: of the auto iris
100
PEAK/AVE 0 To determine the
: accounting ratio of the
100 peak against the
standard of the auto iris
2 IRIS- NORM1 To select the auto iris
WINDOW NORM2 detection window
CENTER NORM1: Center of the
NORM2: Bottom side of
CENTR: Spots at the
3 IRISGAIN CAM To select whether the
LENS iris gain is adjusted on
the camera recorder or
the lens
GAINVAL 1 To set the IRIS GAIN
: adjustment value on the
20 camera recorder
4 USER-SW USW-M To select the USER
USW-1 switch where functions
USW-2 will be changed
SELECT INH To select the function to
S.GAIN be assigned to the
DS.GAIN USER button selected
LINE MIX in the USER-SW item
S.IRIS <Note>
I.OVR When the unit is
S.BLK connected to the
B.GAMMA camera recorder, the
AUDIO CH1 "I.OVR" operation is
AUDIO CH2 disabled.
REC SW
Y GET
RET SW
PRE REC
DRS
Contents description Storage
Yes
screen
Yes
the screen
center of the
screen
Yes
Yes
E-30