Water Hose Installation - Yamaha YP20T Manuel D'utilisation

0˚C 25˚C
å YAMALUBE 4 (10W-40)
ç SAE #20
32˚F 80˚F
1
2
Recommended engine oil:
å YAMALUBE 4 (10W-40),
SAE 10W-30 or 10W-40
∫ SAE #30
ç SAE #20
∂ SAE 10W
Recommended engine oil grade:
API Service SE type or higher
Engine oil quantity:
YP20T:
0.6 L (0.63 US qt, 0.53 Imp qt)
YP30T:
1.0 L (1.06 US qt, 0.88 Imp qt)
YP40T:
1.1 L (1.16 US qt, 0.97 Imp qt)

Water hose installation

1. Install the hose joint to the pump.
1 Hose joint
NOTICE
When installing the joint to the pump, be sure the
gasket is in place.
2. Connect the hoses on the joints with clamp.
3. Connect the strainer on the inlet hose end.
2 Strainer
NOTICE
9 Be sure the hoses are installed securely or air
leak will occur and water will not be drawn up.
9 Be sure the strainer is installed or pump dam-
age may occur.
– 9 –