Machine Specifications; Delivery Scope; Milling Machine - IDC Mill 5X Mode D'emploi

M A C H I N E S P E C I F I C A T I O N S
4

Machine Specifications

E N 4.1

Milling machine

This User Manual describes different mod-
els of the milling machine. Therefore, the
representations can deviate from the
actual appearance of the machine.
4.1.1

Delivery Scope

_ Milling machine
_ Mains cable
_ USB cable (5 m)
_ Network cable (5 m)
_ Control cable, extraction
_ Compressed-air hoses (250 mm and 2000 mm)
_ Cleaning hose with brush head
_ Service unit
_ Service set for Jäger spindle
_ CAM software package
▪ CD CAM software (CAM software and milling
machine software)
_ Blank template, zirconium oxide opaque
_ Test blank
_ CNC cutter, 2.5 (milling tool mounted in collet)
_ Screw set
_ Torque wrench, 4 Nm
_ Blank holder 71
_ Extractor adapter
_ Extraction hood
_ Drain cover
_ Slide caliper
40
The milling machine is delivered with a test blank
inserted in the blank holder. Prior to delivery, a
test object was factory-milled in order to check
the zero point settings. Possibly remaining milled
shavings/chips are not a reason for rejection. The
test blank is provided for test milling and calibra-
tion of the milling machine.
▷ After unpacking, check the machine for com-
pleteness and possible transport damages.
Please claim any transport damages immedi-
ately with your supplier.