Storage - Hofmann monty 1675 Mode D'emploi

R
G
T
6-3
H
6-4
monty 1675
I. The machine is equipped with an automatic lubricator.
Check the oil level weekly. When adding oil to the
lubricator, disconnect the air supply fi rst, and add oil as
needed. Make sure seals are in place when repositioning
the cup.
WARNING!
PAY ATTENTION TO KEEP FILLED THE OIL TANK OF
THE OILER, EXPECIALLY FOR AIR MOTOR OPERATED
MACHINES.
USE ONLY OILS FOR AIR DEVICES, DO NOT USE
BRAKE FLUID OR OTHER NON RECOMMEND
F
LUBRICANTS.
Suggested oils for the fi lter/lubricator unit:
WHITE MINERAL OIL: 15 cSt
S
TAMOIL:
SHELL:
BP:
TOTAL:
ESSO:
J. Periodically check the lubricator effi ciency. One oil drop
(G, Fig. 6.5) every 4-5 operations of the bead breaker
indicates that the correct amount of oil is being dispersed
in the system.
If necessary adjust the oil fl ow with screw (R, Fig.6-3).
K. In the machine equipped with a beading unit for tubeless
tires, it is mandatory to drain condensation from the tank
daily.
WARNING!
WEAR SAFETY GLASSES BEFORE OPERATING THE VALVE.
• Turn the handle "H" of the valve (Fig. 6-4) placed in
the lower side of the column.

6.1 Storage

In case the machine is not to be used for a long period of
time (6 months or more) it is necessary to disconnect all
power sources, discharge the bead seater tank (only GP
version), protect all parts that may be damaged, protect
the air hoses that may be damaged by the drying process.
When putting the machine back in operation, check fi rst
the condition of all previously protected parts, and check
for correct functioning of all devices before using the
machine again.
27
EN -
WHITE MINERAL OIL 15
ONDINA OIL 15
ENERGOL WT3
LOBELIA SB 15
MARCOL 82