Installation Kit Contents; Suggested Tool Requirements - Friedrich CP Line CP08 Manuel D'utilisation Et D'installation

Installation Kit Contents

2
1
5 6
12
9
11

Suggested Tool Requirements

SCREWDRIVER(+, -), RULER, KNIFE, HAMMER, PENCIL, LEVEL
PREPARATION OF CHASSIS
1. Remove the screws which fasten the cabinet at both
sides and at the back.(4 total)
2. Slide the unit from the cabinet by gripping the base pan
handle and pulling forward while bracing the cabinet.
3. Cut the window sash seal to the proper length.
Peel off the backing and attach the Foam-PE
underside of the window sash.
4. Remove the backing from the top upper guide Foam-PE
and attach it to the bottom of the Upper Guide
5. Attach the upper guide onto the top of the cabinet with 3
Type A screws .
6. Insert the Frame Guides
7. Insert the Frame Curtain
Frame Guides .
8. Fasten the curtains to the unit with 4-Type
A screws .
3 4
8 13
7
10
to the
into the bottom of the cabinet.
into the Upper Guide
11
NO. NAME OF PARTS
1 FRAME CURTAIN
2 SILL SUPPORT
3 BOLT
4 NUT
5 SCREW (TYPE A)
6 SCREW (TYPE B)
7 SCREW (TYPE C)
8 FOAM-STRIP
9 UPPER GUIDE
10 FOAM-PE
11 FRAME GUIDE
12 WINDOW LOCKING BRACKET
13 FOAM-PE
.
and
13
(Type A)
9
5
5
11
Q'TY
2
2
2
2
16
3
5
1
1
1
2
1
1
Shipping
Screws
11
(Type A)
5