BH BLADEZ 200U Guide D'utilisation page 16

ASSEMBLY INSTRUCTIONS
STEP 5
Use the Allen Wrench (40) to take out the 4 Screws (15), 4 Spring Washers(11),
4 Arc Washers (16) from the Main Frame (19).
Slide the Post Cover (17) onto the Handlebar Post (2), then connect the Mid Sensor Wire 1
(38) to the Mid Sensor Wire 2 (18) that comes out of the Frame (19). Once connected, place
the Handlebar Post (2) into the Main Frame (19) insert 4 Screws (15), 4 Arc Washers (16)
and 4 Spring Washers (11). Secure with Allen Wrench (44). Once the screws are secure,
slide the handlebar cover down to cover bolts.
Register your product warranty online at: www.BHFitnessUSA.com
TM
16
Questions regarding warranty and parts call: 636.634.2217