Dyna-Glo DGN576SNC Mode D'emploi page 14

OPERATING INSTRUCTIONS
Removing divider panel from grill
1.Remove four grates (T) in lid and firebox
assembly (B).
2. Remove warming rack supports (U), from
the firebox, by pressing both bars in
towards the center of the grill. Swing the
warming rack (U) up, to make clearance
for the divider panel (Y).
3.Remove divider panel (Y) from firebox
assembly (B). Return grates and warming
rack to their original positions.
NOTE: When placing the divider panel into the
firebox assembly (B), please make sure the
bottom of the divider fits between the support
brackets located on the front and back sides of
the firebox.
1
2
3
14
B
T
U
U
B
Y