Date Of Manufacture - Asist LM030 Mode D'emploi

according to the procedure for cleaning the glass and
lens of the device.
Protect the device from vibrations and shocks during
transport.
Keep the device clean.
Use a damp soft cloth to wipe the dust on the surface
of the unit.
Do not use caustic solutions to clean the device.
Do not immerse the appliance in water.
Wipe the surface of the optical components (including
the laser radiation window and the signal receiving
lens) as you would clean a camera lens or glasses.
Do not store the device in an environment with high
temperature and humidity for a long time. If you do
not use the device for a long time, remove the battery
and store it in a cool, dry place in the case provided.
SPECIFICATIONS
Measurement accuracy: +/- 1 mm / 10m
Unit: m / inch / foot
Measuring range (without reflector): 0.05-60 m
Measurement time: 0.3-3 s
Laser class: II
Laser wavelength: 635 nm
Laser output power: ll <1 mw
Degree of protection against dust and moisture: IP54
Automatic shutdown: 45 s
Lighting: white LED
Standard measuring switch: 100,000 x
Tripod socket: 1/4 "
Number of measurements in memory: 20
batteries: alkaline batteries (2 * 1.5 AAA)
Weight: 48 g
Battery indicator: yes
Data retention: yes
Continuous measurement (max / min): yes
Addition / subtraction: yes
Area / volume measuring function /
Pythagorean schema: yes
Operating temperature range: -10C - 40C
ENVIRONMENTAL PROTECTIONWASTE MA-
NAGEMENT
Power tools, accessories and packaging should be
provided for recycling and not to harm the environment.
Do not dispose of power tools into household waste!
According to Directive 2012/19/EU of the European
Parliament and of the Council on waste electrical and
electronic equipment (WEEE) and its approximation
in national laws, unfit power tools must be handed
over at the point of purchase of similar equipment, or
in available collection points designated for collection
and disposal of power tools. Such disposed power
tools will be collected, disassembled and delivered for
environment-friendly recycling.
WARRANTY
In the attached material, you will find our warranty
conditions.

Date of Manufacture

The date of manufacture is incorporated into the serial
number stated in the product nameplate.
The serial number has the format of ORD-YY-SERI,
where ORD is the number of purchase order, YY
stands for the year of manufacture,
of manufacture and SERI means the serial product
number.
35
is the month