Specifications; L020 Control Panel - Smanos L020 Manuel D'utilisation

EN
7. Check the built-in batteries of accessories regularly. If the
batteries are low, replace with new ones.
8. The alarm system requires uninterrupted power supply for
working or standby. Therefore, you need to connect the AC
adapter to a reliable power outlet.
9. Avoid placing the control panel and sirens in bedrooms or
offices, so as not to disturb your rest or work.
10. It is recommended to cut off the power if the system is not
used for long time.
11. If the alarm system is covered with dirt, wipe off the dirt with
soft cloth or tissue. For stains, apply diluted alkaline detergent
to soft cloth, wring the cloth out and wipe the product. Then,
dry the product with dry absorbent cloth.
Please carefully read and strictly follow the previous suggestions.
If the product remains faulty, you can send it to the place of
purchase or authorized maintenance center for maintenance. We
will provide help as soon as possible.
21

Specifications

L020 Control Panel

Power Supply DC 12V 500mA
Battery AA 1.5V LR 6 x 4pcs
Standby Current <140 uA
Alarm Current <270 mA
Internal Siren 105dB
Expandable Accessories 10 remote controls, 30 sensors
Radio Frequency 868MHz or 915MHz (±75 KHz)
Housing Material ABS plastic
Operating Condition Temperature 0°C~+55°C
Relative humidity <80%
(non-condensing)
Dismensions 117 x 118.5 x 40.5 mm (L x W x H)
EN
22