Parts Identification - Panasonic ER1512 Mode D'emploi

Parts identification
  









 
3 mm
0/0 "



4 mm
0/0 "

A Main body
1 Trimming height indicator
2 Dial (Height adjustment
control)
3 0·CHARGE/1 switch
4 Battery capacity lamp
5 Charge status ( ) lamp
6 Appliance socket
B Blade
7 Mounting hook
8 Cleaning lever
9 Moving blade
 Stationary blade
4

 
6 mm
0/0 "



9 mm
0/0 "
 
12
mm
0/0 "


15
mm
0/0 "
C  mm comb attachment
D 4 mm comb attachment
E 6 mm comb attachment
F 9 mm comb attachment
G 12 mm comb attachment
H 15 mm comb attachment
I AC adaptor (RE9‑57)
; Power cord
 Appliance plug
J Cleaning brush
K Oil
L Charging stand
 Charging plug
 Socket
M Comb attachment shelves
(×2)
N Connectors (×2)
Charge
Charging the hair clipper
1
1
Connect the power
cord to the charging
stand.
2
2
Slide the 0·CHARGE/1
switch to "0·CHARGE".
3
3
Place the clipper on
the charging stand and
plug in the AC adaptor
into an outlet.
•
Charge status ( ) lamp glows and charging starts.
•
Charging is completed when Charge status (
blinks. (Max. 1 hour later)
•
1 full charge will provide approximately 70 minutes of
continuous operation.
Connecting the comb attachment shelf to the charging
stand
Determine the connection position for the
charging stand and comb attachment
shelf. Firmly insert the connector into the
slot at the bottom of the charging stand.
•
If the unit wobbles, then further push in
the connector since it has not been
firmly inserted.
) lamp