Technical Data - GOK MIC-Dose Notice De Montage Et De Service

REPLACEMENT
If there is any sign of wear or if the product or parts thereof are damaged, it must be replaced.
When the product has been replaced, observe the steps ASSEMBLY, LEAK TESTING and
START-UP.
Replacing the oil pressure regulator in a MIC combined service box with automatic
shut-off device
MAINTENANCE
Upon proper ASSEMBLY and OPERATION, the product is maintenance-free.
SHUTDOWN
If both sides of the oil line are blocked, the pressure may rise due to temperature-related
changes in the volume of the oil.
If the system will not be used for some time, close the quick-acting stop valve.
DISPOSAL
In order to protect the environment, products contaminated with water-
hazardous substances or that have come in contact with such substances must
not be disposed of in the domestic waste, to public waters or channels.
The product must be disposed of via local collection stations or a recycling station.

TECHNICAL DATA

Inlet pressure POI
Nominal outlet pressure POON
Maximum permissible pressure
Temperature range TS
Guaranteed nominal flow VG
Dimensions H/W/D in mm
LIST OF ACCESSORIES
Product name
Replacement regulator with quick-acting stop valve
4 / 4
If the swelling body
regulator is
 Oil pressure regulator
 Oil pressure regulator
 Replacement only with a new O-ring
the quick-acting stop valve
and the oil pressure regulator
0.2 to 6 bar
100 mbar
PS 6 bar
-10 °C to +60 °C
up to 12 L/h
57 x 118 x 30 (without cover and operating handle)
Regler- und Armaturen-Gesellschaft mbH & Co. KG
Obernbreiter Straße 2-18 • 97340 Marktbreit / Germany
Tel.: +49 9332 404-0 • Fax: +49 9332 404-43
E-Mail: info@gok-online.de • www.gok-online.de • www.gok-blog.de
in the top of the oil pressure
covered with oil:
cannot function.
must be replaced.
between
!
Order no.
03 023 23
part no. 03 023 51 f