Miele MF03 10 Notice De Montage page 7

Produktgruppe 512
7 von 40
Dosierung in den Programmen prüfen und gegebenenfalls einstellen.
Funktionsprüfung durchführen.
Wasserrückgewinnung (WRG) anmelden
Über Serviceebene Hauptmenü
OK-Taste 2x Zurück-Taste (zwei Ebenen zurückspringen)
Funktionsprüfung durchführen.
Zum Verlassen der Serviceebene Maschine ausschalten.
Arbeiten abschließen:
Den Deckel der Maschine anbauen.
Eine Sicherheitsprüfung durchführen.
Die Maschine mit dem elektrischen Netz und gegebenenfalls mit dem Gasnetz verbinden und einschalten.
de
en
Parts required
Quantity Mat. no.
1 09079460
Note
This service and repair work should only be carried out by a suitably qualified electrician (with specialist training, knowledge and
experience, and recent related work experience) in accordance with all appropriate local and national safety regulations.
Commissioning, servicing, modification, testing and maintenance of electrical appliances should only be carried out in accordance
with all appropriate legal requirements, accident prevention regulations and valid standards. All regulations of the appropriate utility
supply companies and standards relating to safety (not limited to electrical safety) are to be complied with.
Danger!
Even with the machine switched off, mains voltage may be applied to some components.
Before any service work is commenced, the machine must be disconnected from the mains. Suitable measurements must be made to
ensure that this is the case.
A general visual check and risk evaluation should always be carried out.
Incorrect conversion or service work can be dangerous (risk of fire, electric shock, etc.).
Danger!
Correct earthing function can be deactivated if casing parts are incorrectly assembled.
Correct earthing function must be ensured when refitting the casing.
Carry out appropriate electrical safety checks.
Danger!
During fitting, all accessible conductive parts that are not connected to the earth must not have any link to earth (strengthened double
insulation).
To confirm this, insulation resistance and touch current measurements must be carried out.
10.02.2012 Diese Unterlagen dürfen ohne unsere Genehmigung weder vervielfältigt noch Dritten zugänglich gemacht werden. Eigentumsrechte vorbehalten.
Serviseeinstellung Grundeinstellung
Diskettensymbol zum Speichern der WRG-Anmeldung.
Designation
Fitting kit - MF03 10-20 multifunction module PWxx7
Umbau- und Montageanweisung
M.-Nr. 09087200
Wasserzulauf Ventilblock 2 Wasserventil 3 : K6