About Menu; Shimano Di2 Menu; Rohloff Menu - Flyer MOUNTAIN Série Notice Originale

5.5.20 About menu

The About menu shows the current software
versions of the individual components .

5.5.21 Shimano Di2 menu

If the e-bike has an electronic Shimano speed
gear (Shimano Di2), the corresponding gears are
shown on the display .
1 . Currently selected gear in the Shimano gear
hub .
5.5.22 Rohloff menu
If your FLYER e-bike has a Rohloff electronic
speed gear, the gears are shown on the display .
You can use the toggle switch to change gear at
any time .
1.
1. Currently selected gear in the Rohloff gear hub.
If the toggle switch is held down, the system shifts
three gears at a time .
The „Auto downshift" function of an electronic
Rohloff gear shift system is described under
menu item 5 .5 .14 .
If the E14 needs to be replaced due to a defect, it
can be calibrated under the menu item "Calibra-
tion -> E14" .
Once you have pressed the menu item "E14", fol-
low the instructions on the display .
5.5.23 Connection with Android smartphones
Installing the komoot app
You can download the komoot app from the Goo-
gle Play Store . You will also have to install the
„komoot Connect" app from the Play Store .
If you cannot find the „komoot Connect" app in
the store, your smartphone does not support this
function . It will not be possible to pair it with your
e-bike .
Setting up the komoot app and pairing it with
your e-bike
Once both apps have been installed, you must
create a user profile with komoot.
You can register directly in the app or via the ko-
moot website:
www .komoot .de/
Activating the maps using your voucher code
A voucher for the komoot app is included with
your e-bike purchase . Visit our website to collect
your code: www.flyer-bikes.com/navigation/
You will then receive your voucher code by e-mail,
which you can use to activate the full range of
maps of the world at www .komoot .com/g
17
EN