Num'axes PIE1059 Guide D'utilisation page 18

Settings
Mode
Language
Photo Resolution
Video resolution
Multi shot
Video length
PIR interval
PIR sensitivity
Date/Time
PIE1059 - Indice B – Octobre 2021
Programmable options (default settings in bold characters)
Photo / Video / Photo + Video
− Photo: the camera shoots only photos based on the configured "Photo
resolution" and "Multi-shot" settings.
− Video: the camera shoots only videos based on the configured "Video
resolution" and "Video length" settings.
− Photo + Video: upon the same trigger event, the camera shoots photo(s)
first then a video based on the configured "Photo resolution/Multi-shot"
and "Video resolution/Video length" settings.
Français / English / Español / Deutsch / Italiano...
32 MP / 20 MP / 16 MP / 8 MP / 5 MP / 3 MP
Higher resolution produces better quality photos but creates larger files that
take up more of the memory card capacity (fills up faster).
FULL HD – 1080P (1920x1080) / HD – 720P (1280x720) / VGA (640x480)
Higher resolution produces better quality videos but creates larger files that
take up more of the memory card capacity (fills up faster).
1 photo / 2 photos / 3 photos / 4 photos / 5 photos
3 MP or 5 MP photo resolution: programmable from 1 up to 5 photos per
trigger
8 MP photo resolution: programmable from 1 up to 4 photos per trigger
16 MP, 20 MP or 32 MP photo resolution: programmable from 1 up to 3
photos per trigger
Programmable from 03 up to 60 seconds – Default setting: 10 seconds
Default PIR interval: 20 seconds
Programmable from 5 seconds up to 60 minutes (by increments of 1 second
from 5 to 60 seconds – by increments of 1 minute from 1 to 60 minutes)
Allows you to set the desired time interval between photos/videos upon
motion. This option avoids camera taking to many photos or videos.
Example: if the PIR interval is set to 01 minute, the camera will wait 1 minute
between photo/video recordings with motion.
High / Medium / Low
High sensitivity:
1) is more sensitive to movements by smaller subjects;
2) offers longer detection distance;
3) makes it easier for the PIR sensor to detect a difference between body heat
and outdoor temperature;
4) makes it easier to trigger the camera.
In high temperature environment, subjects body heat and environment
temperature are hard to tell by the camera, the suggested setting is high.
It is recommended to use low PIR sensitivity in environments with lots of
interference like hot wind, smoke, near window, etc.
09/07/2021
MM/DD/YYYY
15 : 57 : 28
18/56