Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Front:
Rear:
INSTALLATION
Mount the strobe with the mounting-bracket on the desired installation spot. For safety reasons use an
additional safety-rope. Adjust the desired inclination-angle via the mounting-bracket and fix the bracket-
screws.
This device falls under protection-class I. Therefore it is essential that the yellow/green conductor gets
connected to earth.The electric connection must be carried out by a qualified employee.
1) Mounting-bracket
2) Colour-cap
3) Fixation-screw
4) Display of the inclination-angle
5) Connection-clasp
6) Rotary-control for adjusting the flash-rate
7) IN-socket for connecting a controller
8) OUT-socket for connecting the next strobe
when synchronising
9) Power supply
12
Publicité
Table des Matières
