Muskoka MHC35BL Manuel D'utilisation page 8

Installation - Wall-Mount (continued)
4
Securing the mounting bracket
□ Secure the mounting bracket (C) to the wall using four
large screws (BB).
5
Hanging the electric firebox
□ Hang the electric firebox (A) on the hooks at the bottom of
the mounting bracket (C), and push the top of the electric
firebox (A) into the mounting bracket (C).
□ Secure the electric firebox (A) to the mounting bracket
(C) by refitting the two small screws (AA) which were
removed in step 1.
6
Inserting the ember bed
□ Arrange the ember beds (acrylic crystals [D], pebbles [E]
or log set [F] ) along the inset window ledge at the front of
the electric firebox (A).
7
Installing the glass front
NOTE: This glass front is heavy. It is recommended that you use two
people at this stage to prevent damage to the glass front or the electric
firebox.
□ Lift the glass front (B) into place, making sure the 2 tabs on the top
back of the glass front (B) fit securely into the holes on the top of
the electric firebox (A).
□ Secure the glass front (B) by fastening two small screws (AA) on
both sides.
8
C
C
WALL
D, E, or F
A
A
WALL
BB
AA
A
B
AA