Installation - Wall-Mount - Muskoka MHC35BL Manuel D'utilisation

Installation - Wall-Mount

1
Removing the mounting bracket
□ Using a screwdriver, loosen the two screws (AA) that
secure the mounting bracket (C) to the top of the electric
firebox (A), and remove the mounting bracket (C).
2
Positioning the mounting bracket
□ Choose a solid wall. Position the mounting bracket (C)
where the electric firebox (A) is to be installed on the wall,
and ensure that the mounting bracket (C) is level.
□ Use a pen to mark the 4 mounting holes on the wall at the
desired mounting location, using the mounting bracket (C)
as a template.
3
Securing the mounting bracket
□ Insert the 4 self-drilling wall anchors (CC) into the wall
where previously marked. If installing the mounting
bracket (C) to a wall stud, there is no need to drill the
holes in the wood and no need for the plastic wall anchors
(CC). It is recommended to install the mounting bracket to
at least one stud.
A
C
C
CC
AA
7