Operation - Muskoka MHC35BL Manuel D'utilisation

Operation

USING THE MANUAL AND REMOTE CONTROLS
On the top-right side plate of the electric fireplace (A) is the control panel. This panel contains the buttons to properly operate the electric
fireplace. The buttons on the control panel on the side of the electric fireplace (A) and the remote control (K) function in the same way. The
remote control has an effective range of up to 3.9 m / 13 ft.
1. Power Button
2. Flame Control Button
3. Thermostat Control Button
4. Side Light Control Button
5. Timer Control Button
6. Digital Display Panel
NOTE: The remote control is intended only for the functional operation product,
it cannot lock/unlock the heating function or adjust the temperature setting.
USING THE POWER BUTTON
□ The main power button (1) is located on the control panel
on the side of the electric fireplace.
□ Pressing the power button (1) once turns the power on.
□ Pressing the power button (1) again will turn the power
off.
□ If you find that none of the other buttons appear to work,
check to make sure that the main power (1) is turned on.
USING THE FLAME CONTROL BUTTON
□ Press the flame control button (2) to turn on the ember
bed and flame effect.
□ Pressing the flame control button (2) once turns flames on
and lights the ember bed.
□ Pressing the flame control button (2) again will cycle
through different colors of the ember bed. The color
rotation mode will cycle through the 3 different color
settings continuously. Reference the table for more
detailed information.
4
3
K
BATTERY REPLACEMENT
3 Volt lithium coin cell type 2032
1.
3.
This product contains a button battery. If swallowed, it could cause severe injury
or death in just 2 hours. Seek medical attention immediately. Please dispose of
the used battery per municipal or provincial/state law.
Button Press
1st Press
2nd Press
3rd Press
4th Press
1
2
5
2.
4.
Flame State Ember Bed Color
ON Amber
ON
ON Amber and Blue
ON Color Rotation
6
5
4
3
2
1
Blue
11