Muskoka MHC35BL Manuel D'utilisation page 10

Installation - Table Top (continued)
3
Securing the mounting bracket
□ Use a screwdriver to secure the mounting bracket (C) to
the table top stand with 4 small screws (AA).
4
Securing the electric firebox
□ Using a screwdriver, secure the electric firebox (A) to the
top of the mounting bracket (C) with 2 small screws (AA).
5
Inserting the ember bed
□ Arrange the ember beds (acrylic crystals [D], pebbles [E]
or log set [F] ) along the inset window ledge at the front of
the electric firebox (A).
6
Installing the glass front
NOTE: This glass front is heavy. It is recommended that you use two
people at this stage to prevent damage to the glass front or the electric
firebox.
□ Lift the glass front (B) into place, making sure the 2 tabs on the
top back of the glass fit securely into the holes on the top of the
electric firebox (A).
□ Secure the glass front (B) by fastening two small screws (AA) on
both sides.
10
AA
C
A
A
A
STAND
C
AA
D, E, or F
B
AA