Installation; Instruction For Wall Mounting - Euronda EUROSEAL 2001 PLUS Manuel D'instructions

EUROSEAL ® 2001 PLUS
PART 2

INSTALLATION

The thermosealing machine EUROSEAL 2001 PLUS has been tried and tested
®
in our factory.
Remove the packing and install the apparatus using the following instructions:
1. Install the machine on a plain flat surface with a remaining space of a least 50-80 mm. on all sides.
2. Do not install the machine close to a sink or similar to avoid contact with water and possible
electrical short circuits.
3. Keep:± far from heat sources
4. Install the machine in a ventilated area.
5. Ensure that the electrical cable is not folded up and freely reaches the electrical socket.
6. Insert the plug and the machine is ready for use.
Upon request the machine is able to work also with 110V, 50/60 Hz.
INSTRUCTIONS FOR WALL MOUNTING
Screw with Use a wall
a cap of hanger suitable to
mm.9,5 the wall surface
6