Disposal Information; A~Åöéê; Declaration Of Conformity; Guarantee - Flex CSM 4060 Mode D'emploi

Portable circular saw for metals CSM 4060

Disposal information

a~åÖÉê>
oÉåÇÉê=êÉÇìåÇ~åí=éçïÉê=íççäë=ìåìë~ÄäÉ=
Äó êÉãçîáåÖ=íÜÉ=éçïÉê=ÅçêÇK
Only for EU countries
Do not dispose of electric tools
together with household waste
material!
In observance of European Directive 2002/96/EC
on waste electrical and electronic equipment and
its implementation in accordance with national
law, electric tools that have reached the end of
their life must be collected separately and
returned to an environmentally compatible
recycling facility.
kçíÉ>
mäÉ~ëÉ=~ëâ=óçìê=ÇÉ~äÉê=~Äçìí=Çáëéçë~ä=çéíáçåë=
Ñçê=êÉÇìåÇ~åí=éçïÉê=íççäëK

Declaration of Conformity

We hereby declare that this product
corresponds with the following standards
or normative documents:
EN 60745 in accordance with the regu-
lations of the directives 2004/108/EC,
2006/42/EC, 2011/65/EC.
Responsible for technical documents:
FLEX-Elektrowerkzeuge GmbH, R & D
Bahnhofstrasse 15, D-71711 Steinheim/Murr
Eckhard Rühle
Manager Research &
Development (R & D)
20.02.2012
FLEX-Elektrowerkzeuge GmbH
Bahnhofstrasse 15, D-71711 Steinheim/Murr
Oliver Schneider
Manager Quality
Department (QD)

Guarantee

FLEX will provide the end consumer of a newly
purchased power tool with a 2-year
manufacturer's guarantee commencing on the
date the power tool is purchased.
The guarantee covers only defects which can
be attributed to a material and/or production
fault as well as non-performance of warranted
characteristics. When making a claim under
the guarantee, enclose the original sales
receipt with purchase date. Repairs under the
guarantee may be carried out only by
workshops or service centres authorised by
Flex. a claim may be made under the
guarantee only if the power tool has been used
as intended. In particular, the guarantee does
not cover wear and tear, improper use, partially
or completely dismantled power tools as well
as any damage caused by overloading the
power tool, the use of non-permitted, defective
or incorrectly used insertable tools, damage to
the insertable tool or workpiece caused by the
power tool, violent use, consequential damage
which can be attributed to improper or
inadequate maintenance on the part of the
customer or a third party, damage caused by
an external influence or foreign objects, e.g.
sand or stones, as well as damage caused by
non-compliance with the operating
instructions, e.g. connection to an incorrect
mains voltage or current type. Claims for
insertable tools or accessories can only be
made under the guarantee provided they are
used with power tools for the intended or
permitted use.

Exemption from liability

The manufacturer and his representative are
not liable for any damage and lost profit due to
interruption in business caused by the product
or by an unusable product.
The manufacturer and his representative are
not liable for any damage which was caused by
improper use of the power tool or by use of the
power tool with products from other
manufacturers.
25