Material Damage; Starting The Device - NUK 10.256.380 Mode D'emploi

Masquer les pouces Voir aussi pour 10.256.380:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

• Keep the battery out of reach of child-
ren. There is risk of ingestion. If there is
a suspicion of swallwing the battery,
immediately see a doctor.
• Batteries may contain toxic substances,
so follow the instructions for disposal
(see
"10.2 Disposable/rechargeable
batteries" on page 52).
Caution! To prevent material damage:
• The batteries must be removed when flat
or if the device is not going to be used for
an extended period, otherwise leaking
batteries may damage the device.
• Be sure only to use type CR2032
batteries.
1. Remove all packaging material from the
device.
2. Pull out the insulating strip of the battery.
The thermometer switches on with a beep.

4. Starting the device

- 33 -

3.6 Material damage

Caution! To prevent material damage,
follow the instructions below.
• Do not expose the device to direct
sunlight or extreme heat, as UV rays and
overheating may make the plastics
brittle and the electronics might be
damaged.
• Never use the device in very damp or
wet surroundings.
• Never use caustic or abrasive cleaning
agents, as this could damage your device.
• Do not submerge the device in water or
expose it to direct moisture. Avoid the
reflective mirror steaming up.
Note: If the insulating strip tears off when
you pull it out, take out the battery and
remove the rest of the insulating
strip (see "6.2 Changing the battery" on
page 40).

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Thermometer flash

Table des Matières