Slope Guide - EarthQuake 600050 Serie Manuel De L'utilisateur

SLOPE GUIDE

Use this guide and do not trim on a slope greater than 15
degrees.
A 10 degree slope is a hill that increases in height at
approximately 1.76 feet in 10 feet.
A 15 degree slope is a hill that increases in height at
approximately 2.68 feet in 10 feet.
Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-5
SIGHT AND HOLD THIS GUIDE LEVEL WITH A VERTICAL TREE, A
CORNER OF A STRCUTURE, A POWER LINE POLE, OR A FENCE.
10 DEGREES
Operate a trimmer across the face of slopes, never up or
15 DEGREES
WARNING
USE EXTREME CARE AT ALL TIMES AND AVOID
SUDDEN TURNS OR MANEUVERS. FOLLOW OTHER
INSTRUCTIONS IN THIS MANUAL FOR SAFETY IN
TRIMMING ON SLOPES. OPERATE A TRIMMER ACROSS
THE FACE OF SLOPES, NEVER UP OR DOWN SLOPES.
USE EXTRA CARE WHEN OPERATING ON OR NEAR
SLOPES AND OBSTRUCTIONS.
Operator's Manual
Trimmer Mower 600050 Series
down slopes
19