Dyna-Glo DGH483CRP Mode D'emploi page 18

ASSEMBLY INSTRUCTIONS
22. Open the left door assembly (A1) and the right
door assembly (B1). Place LP gas cylinder
(sold separately) into the nesting hole located
on the bottom shelf (W). Rotate the LP gas
cylinder until the hose/regulator coupling aligns
with the threaded valve of the cylinder. Hand
tighten the hose/regulator coupling to the
threaded valve of the LP gas cylinder.
Tighten the tank screw clockwise
front of cart until the cylinder is secured in
place inside the nesting hole of the Bottom
shelf (W).
Fully Assembled
Front View
Rear View
22
in the
A1
18
W
B1
Tank
Screw
LP Gas
Tank
Cylinder
Screw