Dyna-Glo DGH483CRP Mode D'emploi page 14

ASSEMBLY INSTRUCTIONS
15. Insert two M6x16 screws (AA) in left side of Grill
body (D) as shown, leaving 5mm of threads
exposed. Align key hole in Left side table (N)
with the two screws just inserted in the Grill body
(D), and insert three M6x16 screws (AA) in the
remaining holes in the Grill body (D). Adjust Left
side table (N) correctly, then tighten all screws.
Hardware Used
AA M6x16 Screw
15
x 5
AA
14
AA
D
N
AA