Dyna-Glo DGH483CRP Mode D'emploi page 12

ASSEMBLY INSTRUCTIONS
11. Carefully place the Grill body (D) onto Cart
left side panel assembly (R) and Cart right
side panel assembly (U). Adjust the Grill body
(D) so that the holes in the Grill body (D) are
aligned with holes in the tabs of Cart left side
panel assembly (R) and Cart right side panel
assembly (U).
Note: Make sure the gas hose/regulator
assembly is inside the cart. Secure the Grill
body (D) with four M6X16 screws (AA).
Hardware Used
AA
M6x16 Screw
12. Align key hole in grill body (D) with the two
screws just inserted in the Cart right side panel
assembly (U), then tighten all screws.
11
AA
R
x 4
12
12
D
U
D
U