Install Local Air Conditioner(Through The Wall) - Hisense APC12 3010F Instructions D'installation

Install Exhaust Hose and Adapter
1. Roll the air conditioner to selected location. see "Location
Requirements."
2. Attach the d
ummy coupling
anticlockwise until securely locked into place.
3. Attach the window exhaust adapter to the flexible exhaust
hose. Turn anticlockwise until securely locked into place.
A. Flexible exhaust hose
B. Wall exhaust adapter
4. Insert the d
ummy coupling
conditioner.
5. Slide down to lock the hose into place.
B
D
A. Evaporator air intake
B. D
ummy coupling
C. Flexible exhaust hose
D. Condenser air intake

Install Local Air Conditioner(through the wall)

to the flexible exhaust hose. Turn
A
B
into the slot on the back of the air
C
Drill a Hole for wall cover
1.Decide the position of hole for wall cover according to the
location of mounting plate.
2.Drill a hole on the wall. The hole should a little biger
than wall cover.
3.Install wall cover through the wall hole to keep the wall
tidy and clean,fixed with four screws.
Insert the wall exhaust adapter to wall cover
1. Insert the d
A
Insert the wall exhaust adapter to wall cover
1.Remove wall exhaust adapter from the wall cover.
2.Cover the wall cover.
16
Wall hole
(prepared by user)
into the wall cover on the wall.
ummy coupling
Cover