Location Requirements; Electrical Requirements; Installation Instructions; Unpack The Air Conditioner - Hisense APC12 3010F Instructions D'installation

NOTES:
■ The flexible exhaust hose allows placement of the air
conditioner between 60 cm and 170 cm
For appliances with supplementary heaters,the minimum
clearance from the appliances to combustible surfaces is 100cm.
■ Local air conditioners are designed as supplemental
cooling to local areas within a room.
Vertical Slide Widow
combustible surfaces
100cm
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
Excessive Weight Hazard
Use two or more people to move and install
air conditioner.
Failure to do so can result in back or other injury.
Remove packaging materials
Remove and dispose of/recycle packaging materials.
■
Remove tape and glue residue from surfaces before turning
■
on the air conditioner. Rub a small amount of liquid dish soap
over the adhesive with your fingers. Wipe with warm water
and dry.

Location Requirements

from window or door.
60 cm - 170 cm

Electrical Requirements

WARNING

INSTALLATION INSTRUCTIONS

Unpack the Air Conditioner

Horizontal Slide Window
combustible surfaces
100cm
■ The
local air conditioner should be connected to a 220V-240 ,
50 HZ, 20-amp fuse grounded 3 prong outlet.
■ The use of a time-delay fuse or time-delay circuit breaker is
recommended.
■ All wiring must comply with local and the national electrical
codes and be installed by a qualified electrician. If you have
any questions, contact a qualified electrician.
Do not use sharp instruments, rubbing alcohol, flammable
■
fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your air conditioner.
Handle the air conditioner gently.
■
12
60 cm - 170 cm
V