Accessories; Magnets; Control Arm Btl2-Gs10; Connection Cables, Connectors - Balluff BTL5-T1 M P-S103 Serie Notice D'utilisation

BTL5-T1_ _-M_ _ _ _-P-S103
Micropulse Linear Transducer – Profile Housing
8 Accessories (order separately)
8.1

Magnets

Spacing, offset and installation
➥ ➥ ➥ ➥ ➥ pages 5 and 6
Operating temp. –40 °C to +85 °C
➥ ➥ ➥ ➥ ➥ Fig. 3-3
BTL5-P-3800-2
Weight approx. 12 g
Housing plastic
BTL5-F-2814-1S ➥ ➥ ➥ ➥ ➥ Fig. 3-7
Weight approx. 28 g
Housing plastic
BTL5-M-2814-1S ➥ ➥ ➥ ➥ ➥ Fig. 3-8
Weight approx. 32 g
Housing anodized
aluminum
Contact surface plastic
BTL5-N-2814-1S ➥ ➥ ➥ ➥ ➥ Fig. 3-8
Weight approx. 35 g
Housing anodized
aluminum
Contact surface plastic
BTL5-P-3800-2 and
BTL5-F/M/N-2814-1S:
The indicated non-linearity of
± 30 µm is valid when the mag-
net is guided accurately at a
constant vertical distance from
the transducer within the permis-
sible distance "D".
➥ ➥ ➥ ➥ ➥ Fig. 3-4
BTL5-P-5500-2
Weight approx. 40 g
Housing plastic
➥ ➥ ➥ ➥ ➥ Fig. 3-5
BTL5-P-4500-1
Weight approx. 80 g
Housing plastic
Operating temp. –40 °C to +60 °C
BTL5-P5500-2 and
BTL5-P-4500-1:
Recommended resolution
20 µm and above
Non-linearity < ± 100 µm
The indicated non-linearity of
< ± 100 µm is valid when the
magnet is guided accurately at a
constant vertical distance from
the transducer within the permis-
sible distance "D".
8.2 Control arm
BTL2-GS10-_ _ _ _-A
Aluminum,
➥ ➥ ➥ ➥ ➥ Fig. 3-9
dimensions
Various standard lengths LG avail-
able (please specify when order-
ing)
8.3 Connection cables,
connectors
➥ ➥ ➥ ➥ ➥ Fig. 4-3
Connectors female
BKS-S103/GS103-CP-_ _ _
➥ ➥ ➥ ➥ ➥ Fig. 4-4
Connection cables
➥ ➥ ➥ ➥ ➥ Fig. 4-5
Connectors male
BKS-S105-R01
➥ ➥ ➥ ➥ ➥ Fig. 4-6
Termination resistor
Cable with connector
➥ ➥ ➥ ➥ ➥ Fig. 4-7
BKS-S48-15-CP-_ _
➥ ➥ ➥ ➥ ➥ Fig. 4-8
Close-off cap
➥ ➥ ➥ ➥ ➥ Fig. 4-9
Transparent cover
english
11