Location Of Controls - Albrecht AE7500 Guide D'utilisation

Changing the Country Code

Turn the device off.

Turn the device on again while pressing the MEMORY key. The programmed
country code is displayed.

Select the desired country code with the channel selector.

Turn the device off and on again.
The device now works with the new country code.
5

Location of Controls

Reference Front Panel Diagram
15
13 14
2
1 3
(1) Power ON/OFF and Volume Control
(2) Squelch Control
(3) Microphone Gain Control (recommended setting: full clockwise)
(4) RF Gain Control (recommended setting: full clockwise)
(5) ASQ ON/OFF, PA (recommended setting: ASQ ON)
(6) RF Output Power Control (recommended setting: full clockwise)
(7) Tone Control (recommended setting: center)
(8) Echo Volume Control (recommended setting: full counter clockwise)
(9) Echo Delay Control (recommended setting: center)
(10) CLARIFIER (recommended setting: center)
(11) All Mode Talk Back Control (recommended setting: full counter clockwise)
17 18 20
16 19
4 6
5 7
English
21 22
8 10
9 11
12
23