3.1- General safety warnings
•
Understand the product. Read and follow the instructions in this manual.
•
Do not disassemble or modify the product.
•
Do not use this product if it is not completely assembled or if any parts appear to be
missing or damaged.
•
Use and store indoor dry environment.
•
Maintain good housekeeping and sufficient lighting in the working area.
• Keep children and bystanders away while operating this product.
•
Cleaning and user maintenance shall not be made by children.
•
Use attachments/accessories specified by the manufacturer.
•
Perform service maintenance by qualified personnel only.
3.2- Additional safety rules for electric power tool
•
When the tool is not in use or before performing cleaning, turn it off and disconnect from
main power source.
• To reduce risk of injury, keep children and bystanders away while operating this power tool.
• Never leave the product running unattended. Operate the tool only when hand-held.
• Do not overreach. Keep proper footing and balance at all times.
• Keep handles and grasping surfaces dry, clean and free from oil and grease.
•
Keep hair, loose clothing, finger and any parts of body away from openings or moving
parts.
• To reduce the risk of electric shock, do not use near water or any liquid.
• Do not touch with wet hands.
•
Do not expose the tool to rain or wet conditions. Water entering a power tool will increase
the risk of electric shock.
•
Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust.
•
Maintain labels and rating plate through the life of service.
•
Do not use the power tool if the switch does not turn on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
•
Do not use a power tool while you are tired or under the influence of drugs, alcohol or
medication.
•
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges or moving parts.
•
Store idle power tool out of the reach of children and do not allow persons unfamiliar with
the power tool or these instructions to operate the power tool.
3.3- Special warnings when using this product
• WARNING! Do not use the tool on any materials containing asbestos.
•
Use personal protective equipment. Always wear safety goggles, dust mask, earmuffs,
non-skid safety shoes and safety gloves when using the tool.
•
Make sure that the conditions of both tool and abrasive belt are good before use. Cracks or
breakage may cause a personal injury or property damage.
•
Do not use the tools in any operations that beyond the intended purpose.
•
Never hold the work pieces with your hand or any part of your body during operations
Disconnect product from its power source before maintenance, cleaning or any
intervention on product; or when you do not use product.
Disconnect product from its main power source, if product, power cable, or
extension cord is damaged or cut during operation.
Unplug product by pulling the plug. Do not pull the cable.
Page 9 / 18